Allian Quartz Sand Disinfection Bead Ball Heating Sterilizer for Manicure Nail Tool
Description
Quartz Sand Disinfection Bead Ball Heating Sterilizer for Manicure Nail Tool Specifications: Uses: with nail tool disinfection machine, used for heating high temperature disinfection, generally recommended to change once every 2-3 months. Instructions: 1. Place the sterilizer on a flat table. 2. Open the lid and place the quartz sand into the liner. The amount of quartz sand should not be too much (not more than 80% of the tank volume). 3. Turn on the power, turn on the power switch, the heating indicator lights, and the sterilizer starts heating. 4. After heating for 10 to 12 minutes, insert the tools to be disinfected (eg scissors, razor, etc.) vertically into the quartz sand. 5. The tool is heated for about 20 to 30 seconds. Wear gloves to remove the tool. 6. When the temperature of the sterilizer liner reaches 200 ?C, the heating indicator will automatically turn off, the sterilizer will stop heating. When the liner temperature is lowered, the heating indicator will automatically light up and the steriliz
You may also like
loading
Discover more
