John Richard Array 18" 2-Light Wall Sconce
Description
The Array Wall Sconce boasts a sharp, geometric design that creates a stunning focal point in any contemporary space. The Champagnefinished frame features an alluring pattern of hexagonal shapes embedded with beveled cuts of clear crystal. This stunning piece features two dimmable lights, granting full control over the ambiance in your décor. Handcrafted of steel and crystal Uses two 60watt Type B Candelabra bulbs Overall, approx. 4.5"W x 6.5"D x 18.3"T Backplate, 5.5"Sq. UL listed Professional installation recommended Includes hanging hardware Wipe clean Weight, 6.7 lbs Imported Boxed weight, approximately 9.3 lbs Proposition 65 warning for California residents Entryway Lighting Sizing Guidelines:If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should be installed at eye level; the center of the light source should be roughly 5.5amp;150;6 feet off of the ground. Garage Lighting Sizing Guidelines:Exterior fixtures illuminating the garage should be 1/4th to 1/3rd the height of the garage door.
You may also like
loading
Discover more
